Welcome to DubForce.net

Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.

carsciroccoman

Members
  • Content count

    721
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by carsciroccoman

  1. I'm sure there used to be some wiring diagrams in here somewhere. If you can't find them, i have a paper diagram, i will try and get it scanned and post it up.
  2. Any pics? Might make it easier to diagnose. I have some clocks that might be able to compare against?
  3. It is a standard G60 head, as mentioned the ports are slightly bigger on the 'p' head, they are apparently preferable over the 'a' head. The head on the rallye 1H engine is a different thing to either of these, they have larger holes through for the larger head bolts on the 1H engine. There was a post about it in here a few years ago
  4. OCD gets my vote.
  5. So, I want some cylinder head work doing on my rallye engine, spent hours looking round the tinterwebz and am now more confused than ever as to who to go to. I want a good porting/flowing job doing, three angle valve seats new guides etc.. Dont want to spend thousands. Are the cnc heads worth the cost? After recommendations please people!
  6. So, I melted my pistons in my rallye. I am going to rebuild the engine, bores are poor, so I figured that I might as well bore out to 1.9 The 1H engine standard bore is 80.6mm, I am thinking of going to 82.5 or 83mm using something like the wossner pistons Does anyone have any recommendations on where to get all parts? Pistons, gasket sets etc? Are the standard rods ok? Not building an all out race engine, just a bit more poke. Does anyone still do a '1.9 rebore kit' with all parts included? Head. Any recommendations for a who does a decent porting job? Bottom end balancing? Crank, flywheel etc? who to talk to? I am a competent engine builder, having built many engines over the years, so I plan to do the actual building work myself. Any info much appreciated!
  7. Cheers, had seen them, but I am going full rebuild and boring out to 1.9 now so won't be needing standard anymore!
  8. Pretty sure width is measured from the inside to the inside of the beads, so that would make that wheel a 6.5" Probably a 195 tyre would suit?
  9. So, I guess this proves the leakdown test results... No. 2 showed as 50-60% leakage.. slightly melted.. No. 3 showed as 10-20% leakage, in good order.. No. 4 showed as 95-100% leakage, melted to buggery.. And No. 1 showed as 70-80% leakage, pretty melted too.. Guess its a rebuild then!
  10. Now then. Has anyone had problems with a schrick rocker cover on a G60? I recently fitted one to my rallye, just been for a 'spirited' drive today, it started sounding rough, plumes of blue smoke from the exhaust... pulled over, oil everywhere, found to be coming from the throttle body boost return, all boost hoses full of oil. First thought was charger oil seals failed (had that before!) Topped oil back up, nursed it 15 miles or so home, smoke/oil seemed to be clearing.. oil level still the same when I got home.. hmm So i started looking into it, I have the breather going back to charger, this was full of oil. Removed the breather off the rocker cover and held it at high revs, after about 30 seconds oil started spitting out of the breather on the schrick cover? I am under the impression now that the charger is fine, and oil is coming down the breather at high revs into the charger. Never had that problem with the standard cover? Anyone else had this problem with a schrick rocker cover?
  11. Long shot, but I don't suppose you still have these pistons?
  12. Ran a leakdown test today, suspicions pretty much confirmed. pic of cylinder leakage results..
  13. So, to follow this up it does seem to be breathing a bit heavy, I put the original rocker cover on and all good.. for a bit. Gave it a blast down the motorway all of a sudden same again, spat all its oil out of the breather.. and engine sounding dog rough too.. crap. Managed to crawl the 5 miles home, using 10 litres of oil in the process.. ha. Now breathing much worse, running pretty much on 3 cylinders. Pulled the plugs, bits of melted aluminium on plug four.. I now suspect its melted piston four, causing blowby and excessive breathing, pushing oil up into the rocker cover. So to concur, probably not problem with the schrick cover, just a melted piston!
  14. From facebook.. Hello Guys, First of all, thank you all for the support, and for allowing me to post in this group. As you already know, we will start taking pre-orders tomorrow for our new upcoming Rallye indicators. I will be organizing a group buy for this particular Rallye UK group, with the help of my very good friend Darron Buckley. Darron is a very active and known member in many Rallye Groups. The main goal of the group buy is to save you guys on shipping costs and duties. Darron will be the main distributor and will ship each and every order directly from the UK. All orders will be shipped to Darron directly from the USA. Darron, will then ship every order out to you guys after he receives the shipment. Indicators should be arriving our VX Tuning warehouse around the third week of February. We will then prepare the shipment and will send to the UK within 3 days. It will take approximately 5-6 days for the shipment to arrive at the UK. After the shipment arrives at the UK, every order will be shipped within 3-4 days. We will be offering you guys a 20% off for those who wish to pre-order in this group. Coupon code will not be necessary for you guys, as this group buy will not be directly from our website. For those who wish to pre-order, an invoice will be sent directly via PayPal. Our indicators are sold individually and will start at $64.99 for Clear and Smoked style, and $74.99 for Amber "OE" Style, after the 20% discount. We also offer "OE" type Stainless Steel Screws for an additional $2 dollars. Orders will be shipped via " Royal Mail" with a tracking number and insured. Shipping will be a flat rate of $20 dollars for up to 2 indicators. Every additional indicator will be an additional $2.25 dollars. If you wish to pre-order or if you have any questions, please send an email to sales@vxtuning.com. PLEASE mention that you are in the Rallye UK Group Buy. All invoices and payments will be via PayPal .
  15. impressive work there. I like the bov conversion, how is it controlled? What opens and closes it?
  16. Google PD tandem pump failure, quite common apparently. Doesn't look to difficult to replace.
  17. My rallye failed on emissions, I think due to lambda being duff. I unplugged it, as far as I'm aware it then uses a base map, not closed loop. I then set mixture using the co pot, sailed through then.
  18. Has anyone seen these? Looks very interesting to me!   http://www.ebay.co.uk/itm/141202458831  
  19. I thought the rubber door seals just pushed on, no glue required? Or am I thinking of the wrong part?
  20. Is this an eight valve? I have a Kent Cams GS3 sat in the garage, 300 degree duration.   http://www.kentcams.com/product-details/195/Camshaft/Camshaft/GS3-competition/          
  21. Does anyone know the part number for a rallye ecu?   And next question, does anyone have one for sale?   Cheers!
  22. ^^ Bugger, I just paid 250 euros for one from Germany, It didn't look as clean as that one either! Ah well. On another note, I unplugged the lambda sensor and adjusted the co pot and it sailed though the emissions test. The lambda must be shot. Still a pig to start though, blue temp sender does absolutely nothing to the running whether its plugged in or not.
  23. Thanks for that, just need to find one now! I have problems with how my rallye is running, its very difficult to start from cold (takes 15-20 attempts before it will run), although once warm starts straight away and seems to have decent power. Its also just failed its mot on emissions being very high. I have replaced the blue temp sender (genuine one), isv and knock sensor. When unplugging the blue temp sender it makes no difference to the running whatsoever, I have checked the wiring to the ecu for continuity, all is good. Unplugging the lambda sensor makes no difference to the running either.
  24. Are you sure they are not just tight/stiff with being new? They would have to be a ball joint, how else would you have the movement when the suspension goes up and down etc?
  25. would these fit straight onto a rallye, 280mm disc size? are the carriers included too?